dmesg - intel edison
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.17-poky-edison+ (sys_dswci@ncsndgbuild04) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Wed Aug 20 16:09:18 CEST 2014
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000005ffffff] reserved
BIOS-e820: [mem 0x0000000006000000-0x000000003f4fffff] usable
BIOS-e820: [mem 0x000000003f500000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec04000-0x00000000fec07fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Intel Corporation Merrifield/BODEGA BAY, BIOS 466 2014.06.23:19.20.05
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3f500 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03F600000 mask FFFE00000 uncachable
2 base 03F800000 mask FFF800000 uncachable
3 base 004000000 mask FFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1014MB, range: 2MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
reg 3, base: 64MB, range: 32MB, type UC
total RAM covered: 982M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 512M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 64MB, range: 32MB, type UC
reg 2, base: 512MB, range: 512MB, type WB
reg 3, base: 1014MB, range: 2MB, type UC
reg 4, base: 1016MB, range: 8MB, type UC
e820: update [mem 0x04000000-0x05ffffff] usable ==> reserved
initial memory mapped: [mem 0x00000000-0x021fffff]
Base memory trampoline at [c0094000] 94000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x03ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x03ffffff] page 2M
init_memory_mapping: [mem 0x06000000-0x33ffffff]
[mem 0x06000000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01d3d000, 0x01d3dfff] PGTABLE
121MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01d3e000, 0x01d3efff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3f4fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00097fff]
node 0: [mem 0x00100000-0x03ffffff]
node 0: [mem 0x06000000-0x3f4fffff]
On node 0 totalpages: 251031
free_area_init_node: node 0, pgdat c1b69540, node_mem_map f740e020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3991 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 216062 pages, LIFO batch:31
HighMem zone: 243 pages used for memmap
HighMem zone: 30978 pages, LIFO batch:7
Using APIC driver default
SFI: Simple Firmware Interface v0.81
SFI: SYST E61F0, 0060 (v1 INTEL INTELFDK)
SFI: CPUS E6296, 0020 (v1 INTEL INTELFDK)
SFI: FREQ E62C2, 0030 (v1 INTEL INTELFDK)
SFI: MMAP E62FE, 01A4 (v1 INTEL INTELFDK)
SFI: XSDT E64B0, 002C (v1 INTEL INTELFDK)
SFI: APIC E653E, 0020 (v1 INTEL INTELFDK)
SFI: WAKE E656A, 0020 (v2 INTEL INTELFDK)
SFI: DEVS E659E, 044B (v1 INTEL INTELFDK)
SFI: GPIO E69F5, 0964 (v1 INTEL INTELFDK)
SFI: OEMB E7365, 0060 (v5 UMGFDK CFGINFO!)
SFI: registering lapic[0]
SFI: registering lapic[2]
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-54
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 71
e820: [mem 0x40000000-0xfebfffff] available for PCI devices
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f73e8000 s33408 r0 d23936 u57344
pcpu-alloc: s33408 r0 d23936 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 249247
Kernel command line: root=/dev/mmcblk1p1 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=8 systemd.unit=multi-user.target
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:0003f500)
Memory: 983456k/1037312k available (6580k kernel code, 20668k reserved, 3187k data, 624k init, 123912k highmem)
virtual kernel memory layout:
fixmap : 0xfff8b000 - 0xfffff000 ( 464 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b8a000 - 0xc1c26000 ( 624 kB)
.data : 0xc186d2b8 - 0xc1b89f80 (3187 kB)
.text : 0xc1200000 - 0xc186d2b8 (6580 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
Additional per-CPU info printed with stalls.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
Console: colour dummy device 80x25
kmemleak: Kernel memory leak detector disabled
tsc: Detected 499.200 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 998.40 BogoMIPS (lpj=4992000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
SFI: MCFG E64F6, 003C (v1 INTEL INTELFDK)
ftrace: allocating 26829 entries in 53 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
smpboot: CPU0: Genuine Intel(R) CPU 4000 @ 500MHz (fam: 06, model: 4a, stepping: 08)
TSC deadline timer enabled
Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ftrace: Allocated trace_printk buffers
CPU 1 irqstacks, hard=f6f8a000 soft=f6f8c000
smpboot: Booting Node 0, Processors #1 OK
Initializing CPU#1
Skipped synchronization checks as TSC is reliable.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Brought up 2 CPUs
smpboot: Total of 2 processors activated (1996.80 BogoMIPS)
devtmpfs: initialized
SFI: SFI sysfs interfaces init success
regulator-dummy: no parameters
NET: Registered protocol family 16
SFI OEMB Layout
OEMB signature : OEMB
OEMB length : 96
OEMB revision : 5
OEMB checksum : 0x9F
OEMB oem_id : UMGFDK
OEMB oem_table_id : CFGINFO!
OEMB board_id : 0x02
OEMB iafw version : 002.001
OEMB val_hooks version : 002.001
OEMB ia suppfw version : 000.000
OEMB scu runtime version : 176.073
OEMB ifwi version : 237.011
intel_soc_thermal: IPC bus = 0, name = soc_thrm, irq = 0x 1
IPC bus, name = bcove_adc, irq = 0x32
IPC bus, name = bcove_thrm, irq = 0x34
IPC bus, name = bcove_power_btn, irq = 0x1e
IPC bus, name = pmic_ccsm, irq = 0x1b
IPC bus, name = i2c_pmic_adap, irq = 0x1b
SDIO bus = 1, name = bcm43xx_clk_vmmc, ref_clock = 26000000, addr =0x401
Using generic wifi platform data
wifi_platform_data: GPIO == 64
IPC bus, name = msic_gpio, irq = 0x31
I2C bus = 1, name = pcal9555a-1, irq = 0x 0, addr = 0x20
I2C bus = 1, name = pcal9555a-2, irq = 0x 0, addr = 0x21
I2C bus = 1, name = pcal9555a-3, irq = 0x 0, addr = 0x22
I2C bus = 1, name = pcal9555a-4, irq = 0x 0, addr = 0x23
SPI bus=5, name= ads7955, irq=0x 0, max_freq=20000000, cs=0
SPI bus=5, name= spidev, irq=0x 0, max_freq=25000000, cs=1
pgrr = 000003d5
PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0x3f500000-0x3f5fffff] (base 0x3f500000)
PCI: MMCONFIG at [mem 0x3f500000-0x3f5fffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
remoteproc0: intel_rproc_scu is available
remoteproc0: Note: remoteproc is still under development and considered experimental.
remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
remoteproc0: registered virtio0 (type 7)
remoteproc0: powering up intel_rproc_scu
remoteproc0: Booting fw image intel_mid/intel_mid_remoteproc.fw, size 4456
Started intel scu remote processor
remoteproc0: remote processor intel_rproc_scu is now up
virtio_rpmsg_bus virtio0: creating channel rpmsg_bcove_adc addr 0x24
virtio_rpmsg_bus virtio0: creating channel rpmsg_mrfl_thermal addr 0x25
virtio_rpmsg_bus virtio0: creating channel rpmsg_mid_powerbtn addr 0x10
virtio_rpmsg_bus virtio0: creating channel rpmsg_pmic_ccsm addr 0x19
virtio_rpmsg_bus virtio0: creating channel rpmsg_i2c_pmic_adap addr 0x20
virtio_rpmsg_bus virtio0: creating channel rpmsg_msic_gpio addr 0x5
virtio_rpmsg_bus virtio0: creating channel rpmsg_ipc_command addr 0xa0
virtio_rpmsg_bus virtio0: creating channel rpmsg_ipc_simple_command addr 0xa1
virtio_rpmsg_bus virtio0: creating channel rpmsg_ipc_raw_command addr 0xa2
virtio_rpmsg_bus virtio0: creating channel rpmsg_pmic addr 0xff
virtio_rpmsg_bus virtio0: creating channel rpmsg_mip addr 0xec
virtio_rpmsg_bus virtio0: creating channel rpmsg_fw_update addr 0x13
virtio_rpmsg_bus virtio0: creating channel rpmsg_ipc_util addr 0x12
virtio_rpmsg_bus virtio0: creating channel rpmsg_flis addr 0xf5
virtio_rpmsg_bus virtio0: creating channel rpmsg_watchdog addr 0xf8
virtio_rpmsg_bus virtio0: creating channel rpmsg_umip addr 0x14
virtio_rpmsg_bus virtio0: creating channel rpmsg_osip addr 0x15
virtio_rpmsg_bus virtio0: creating channel rpmsg_vrtc addr 0xfa
virtio_rpmsg_bus virtio0: creating channel rpmsg_fw_logging addr 0x27
virtio_rpmsg_bus virtio0: creating channel rpmsg_kpd_led addr 0x23
virtio_rpmsg_bus virtio0: creating channel rpmsg_modem_nvram addr 0xa2
virtio_rpmsg_bus virtio0: creating channel rpmsg_mid_pwm addr 0x22
virtio_rpmsg_bus virtio0: rpmsg host is online
intel_mid_rpmsg rpmsg6: Probed rpmsg_ipc device rpmsg_ipc_command
intel_mid_rpmsg rpmsg6: Allocating rpmsg_instance
intel_mid_rpmsg rpmsg7: Probed rpmsg_ipc device rpmsg_ipc_simple_command
intel_mid_rpmsg rpmsg7: Allocating rpmsg_instance
intel_mid_rpmsg rpmsg8: Probed rpmsg_ipc device rpmsg_ipc_raw_command
intel_mid_rpmsg rpmsg8: Allocating rpmsg_instance
Advanced Linux Sound Architecture Driver Initialized.
Intel MID platform detected, using MID PCI ops
PCI: Probing PCI hardware
PCI: root bus 00: using default resources
PCI: Probing PCI hardware (bus 00)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: [8086:1170] type 00 class 0x060000
pci 0000:00:01.0: [8086:1190] type 00 class 0x080501
pci 0000:00:01.0: reg 10: [mem 0xff3fc000-0xff3fc0ff]
pci 0000:00:01.0: PME# supported from D0 D3hot
pci 0000:00:01.2: [8086:1190] type 00 class 0x080501
pci 0000:00:01.2: reg 10: [mem 0xff3fa000-0xff3fa0ff]
pci 0000:00:01.2: PME# supported from D0 D3hot
pci 0000:00:01.3: [8086:1190] type 00 class 0x080501
pci 0000:00:01.3: reg 10: [mem 0xff3fb000-0xff3fb0ff]
pci 0000:00:01.3: PME# supported from D0 D3hot
pci 0000:00:02.0: [8086:1182] type 00 class 0x038000
pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc1ffffff]
pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff]
pci 0000:00:02.0: reg 20: [io 0x7ff8-0x7fff]
pci 0000:00:04.0: [8086:1191] type 00 class 0x070002
pci 0000:00:04.0: reg 10: [mem 0xff010000-0xff01007f]
pci 0000:00:04.0: PME# supported from D0 D3hot
pci 0000:00:04.1: [8086:1191] type 00 class 0x070002
pci 0000:00:04.1: reg 10: [mem 0xff010080-0xff0100ff]
pci 0000:00:04.1: PME# supported from D0 D3hot
pci 0000:00:04.2: [8086:1191] type 00 class 0x070002
pci 0000:00:04.2: reg 10: [mem 0xff010100-0xff01017f]
pci 0000:00:04.2: PME# supported from D0 D3hot
pci 0000:00:04.3: [8086:1191] type 00 class 0x070002
pci 0000:00:04.3: reg 10: [mem 0xff010180-0xff0101ff]
pci 0000:00:04.3: PME# supported from D0 D3hot
pci 0000:00:05.0: [8086:1192] type 00 class 0x070002
pci 0000:00:05.0: reg 10: [mem 0xff010400-0xff0107ff]
pci 0000:00:05.0: PME# supported from D0 D3hot
pci 0000:00:06.0: [8086:1193] type 00 class 0x088000
pci 0000:00:06.0: reg 10: [mem 0xff2a0000-0xff2a0fff]
pci 0000:00:06.0: PME# supported from D0 D3hot
pci 0000:00:06.1: [8086:1193] type 00 class 0x088000
pci 0000:00:06.1: reg 10: [mem 0xff2a1000-0xff2a1fff]
pci 0000:00:06.1: PME# supported from D0 D3hot
pci 0000:00:07.0: [8086:1194] type 00 class 0x088000
pci 0000:00:07.0: reg 10: [mem 0xff188000-0xff188fff]
pci 0000:00:07.0: PME# supported from D0 D3hot
pci 0000:00:07.1: [8086:1194] type 00 class 0x088000
pci 0000:00:07.1: reg 10: [mem 0xff189000-0xff189fff]
pci 0000:00:07.1: PME# supported from D0 D3hot
pci 0000:00:07.2: [8086:1194] type 00 class 0x088000
pci 0000:00:07.2: reg 10: [mem 0xff18a000-0xff18afff]
pci 0000:00:07.2: PME# supported from D0 D3hot
pci 0000:00:08.0: [8086:1195] type 00 class 0x078000
pci 0000:00:08.0: reg 10: [mem 0xff18b000-0xff18bfff]
pci 0000:00:08.0: PME# supported from D0 D3hot
pci 0000:00:08.1: [8086:1195] type 00 class 0x078000
pci 0000:00:08.1: reg 10: [mem 0xff18c000-0xff18cfff]
pci 0000:00:08.1: PME# supported from D0 D3hot
pci 0000:00:08.2: [8086:1195] type 00 class 0x078000
pci 0000:00:08.2: reg 10: [mem 0xff18d000-0xff18dfff]
pci 0000:00:08.2: PME# supported from D0 D3hot
pci 0000:00:08.3: [8086:1195] type 00 class 0x078000
pci 0000:00:08.3: reg 10: [mem 0xff18e000-0xff18efff]
pci 0000:00:08.3: PME# supported from D0 D3hot
pci 0000:00:09.0: [8086:1196] type 00 class 0x078000
pci 0000:00:09.0: reg 10: [mem 0xff18f000-0xff18ffff]
pci 0000:00:09.0: PME# supported from D0 D3hot
pci 0000:00:09.1: [8086:1196] type 00 class 0x078000
pci 0000:00:09.1: reg 10: [mem 0xff190000-0xff190fff]
pci 0000:00:09.1: PME# supported from D0 D3hot
pci 0000:00:09.2: [8086:1196] type 00 class 0x078000
pci 0000:00:09.2: reg 10: [mem 0xff191000-0xff191fff]
pci 0000:00:09.2: PME# supported from D0 D3hot
pci 0000:00:0a.0: [8086:1197] type 00 class 0x078000
pci 0000:00:0a.0: reg 10: [mem 0xff3f8000-0xff3f8fff]
pci 0000:00:0a.0: PME# supported from D0 D3hot
pci 0000:00:0b.0: [8086:1198] type 00 class 0x108000
pci 0000:00:0b.0: reg 10: [mem 0xf9038000-0xf903ffff]
pci 0000:00:0b.0: PME# supported from D0 D3hot
pci 0000:00:0c.0: [8086:1199] type 00 class 0x088000
pci 0000:00:0c.0: reg 10: [mem 0xff008000-0xff008fff]
pci 0000:00:0c.0: reg 14: [mem 0x000df570-0x000df57f]
pci 0000:00:0c.0: PME# supported from D0 D3hot
pci 0000:00:0d.0: [8086:119a] type 00 class 0x040100
pci 0000:00:0d.0: reg 10: [mem 0x05e00000-0x05ffffff]
pci 0000:00:0d.0: reg 14: [mem 0xff340000-0xff343fff]
pci 0000:00:0d.0: reg 18: [mem 0xff344000-0xff344fff]
pci 0000:00:0d.0: reg 1c: [mem 0xff2c0000-0xff2dffff]
pci 0000:00:0d.0: reg 20: [mem 0xff300000-0xff33ffff]
pci 0000:00:0d.0: PME# supported from D0 D3hot
pci 0000:00:0e.0: [8086:119b] type 00 class 0x088000
pci 0000:00:0e.0: reg 10: [mem 0xff298000-0xff29bfff]
pci 0000:00:0e.0: reg 14: [mem 0xff2a2000-0xff2a2fff]
pci 0000:00:0e.0: PME# supported from D0 D3hot
pci 0000:00:11.0: [8086:119e] type 00 class 0x0c0320
pci 0000:00:11.0: reg 10: [mem 0xf9100000-0xf911ffff]
pci 0000:00:11.0: PME# supported from D0 D3hot
pci 0000:00:12.0: [8086:119f] type 00 class 0x118000
pci 0000:00:12.0: reg 10: [mem 0xf9009000-0xf9009fff]
pci 0000:00:12.0: reg 14: [mem 0xf90a0000-0xf90affff]
pci 0000:00:12.0: reg 18: [mem 0xfa000000-0xfaffffff]
pci 0000:00:12.0: PME# supported from D0 D3hot
pci 0000:00:13.0: [8086:11a0] type 00 class 0x0b4000
pci 0000:00:13.0: reg 10: [mem 0xff009000-0xff009fff]
pci 0000:00:13.0: PME# supported from D0 D3hot
pci 0000:00:14.0: [8086:11a1] type 00 class 0x0b4000
pci 0000:00:14.0: reg 10: [mem 0xff00b000-0xff00bfff]
pci 0000:00:14.0: PME# supported from D0 D3hot
pci 0000:00:15.0: [8086:11a2] type 00 class 0x088000
pci 0000:00:15.0: reg 10: [mem 0xff192000-0xff192fff]
pci 0000:00:15.0: PME# supported from D0 D3hot
pci 0000:00:16.0: [8086:11a3] type 00 class 0x0b4000
pci 0000:00:16.0: reg 10: [mem 0xff0d9000-0xff0d90ff]
pci 0000:00:16.0: PME# supported from D0 D3hot
pci 0000:00:16.1: [8086:11a4] type 00 class 0x0b4000
pci 0000:00:16.1: reg 10: [mem 0x04819000-0x04898fff]
pci 0000:00:16.1: reg 14: [mem 0x04919000-0x04920fff]
pci 0000:00:16.1: PME# supported from D0 D3hot
pci 0000:00:17.0: [8086:11a5] type 00 class 0x088000
pci 0000:00:17.0: reg 10: [mem 0xff013000-0xff013fff]
pci 0000:00:17.0: PME# supported from D0 D3hot
pci 0000:00:18.0: [8086:11a6] type 00 class 0x038000
pci 0000:00:18.0: PME# supported from D0 D3hot
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
e820: reserve RAM buffer [mem 0x3f500000-0x3fffffff]
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
intel_scu_flis platform device created
hsu core clock 38 M
intel_pmu_driver 0000:00:14.0: PMU DRIVER Probe called
intel_pmu_driver 0000:00:14.0: after pmu initialization
Switching to clocksource refined-jiffies
intel_scu_flis rpmsg13: Probed flis rpmsg device
intel_scu_flis rpmsg13: Allocating rpmsg_instance
intel_scu_flis intel_scu_flis: scu flis probed
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 24576 bytes)
UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
intel_scu_pmic rpmsg9: Probed pmic rpmsg device
intel_scu_pmic rpmsg9: Allocating rpmsg_instance
intel_scu_watchdog_evo rpmsg14: Probed watchdog rpmsg device
intel_scu_watchdog_evo rpmsg14: Allocating rpmsg_instance
intel_scu_ipcutil rpmsg12: Probed ipcutil rpmsg device
intel_scu_ipcutil rpmsg12: Allocating rpmsg_instance
(oshob) base addr = 0xfffff000
(oshob) identified platform = INTEL_MID_CPU_CHIP_TANGIER
(oshob) oshob version = 1.4
(latest extend oshob) osnib ptr = 0xfffff800
Using latest extended oshob structure size = 1024 bytes
OSNIB Intel size = 32 bytes OEMNIB size = 96 bytes
(extend oshob) SCU buffer size is 16 bytes
[BOOT] RESETSRC0=0x00 RESETSRC1=0x00 (PMIT interrupt tree)
[BOOT] SCU_TR[0]=0x00020001
[BOOT] SCU_TR[1]=0x00000220
[BOOT] SCU_TR[2]=0x00000000
[BOOT] SCU_TR[3]=0x00000000
[BOOT] IA_TR=0x00000000 (oshob)
[BOOT] RR=[fastboot] WD=0x00 ALARM=0x00 (osnib)
[BOOT] WAKESRC=[no matching osip entry] (osnib)
[BOOT] RESETSRC0=0x00 RESETSRC1=0x00 (osnib)
OEMNIB interface registered to debugfs
iio_basincove_gpadc rpmsg0: Probed bcove_gpadc rpmsg device
bcove_adc bcove_adc: bcove adc probed
platform rtc_cmos: registered platform RTC device (no PNP device found)
cryptomgr_test (29) used greatest stack depth: 7540 bytes left
cryptomgr_test (35) used greatest stack depth: 7492 bytes left
vprog1: 1500 2800 mV at 2800 mV normal
vprog2: 1500 2850 mV at 2850 mV normal
vprog3: 1050 2800 mV at 1050 mV normal
audit: initializing netlink socket (disabled)
type=2000 audit(946684804.440:1): initialized
bounce pool size: 64 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.22)
msgmni has been set to 1678
SELinux: Registering netfilter hooks
cryptomgr_test (46) used greatest stack depth: 7372 bytes left
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler cfq registered (default)
list_sort_test: start testing list_sort()
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4 model 0x4A
intel_idle: lapic_timer_reliable_states 0xffffffff
intel_mid_dma 0000:00:0e.0: setting latency timer to 64
intel_mid_dma 0000:00:15.0: setting latency timer to 64
HSU DMA 0000:00:05.0: FUNC: 0 driver: 5 addr:ff010400 len:400
HSU serial 0000:00:04.0: FUNC: 0 driver: 0 addr:ff010000 len:80
HSU serial 0000:00:04.1: FUNC: 1 driver: 0 addr:ff010080 len:80
Found a Intel HSU
0000:00:04.1: ttyMFD0 at MMIO 0xff010080 (irq = 28) is a hsu_bt_port_p
HSU serial 0000:00:04.2: FUNC: 2 driver: 0 addr:ff010100 len:80
Found a Intel HSU
0000:00:04.2: ttyMFD1 at MMIO 0xff010100 (irq = 29) is a hsu_gps_port_p
HSU serial 0000:00:04.3: FUNC: 3 driver: 0 addr:ff010180 len:80
Found a Intel HSU
0000:00:04.3: ttyMFD2 at MMIO 0xff010180 (irq = 54) is a hsu_debug_port_p
Switching to clocksource tsc
console [ttyMFD2] enabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
emmc_ipanic: init success
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver cdc_ncm
dwc3_otg 0000:00:11.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver pl2303
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
i2c /dev entries driver
i2c_pmic rpmsg4: Probed pmic_i2c rpmsg device
coretemp: Enabled Aux0/Aux1 interrupts for coretemp
coretemp: Enabled Aux0/Aux1 interrupts for coretemp
bcove_thrm rpmsg1: Probed mrfl_thermal rpmsg device
thermal thermal_zone0: failed to read out thermal zone 0
thermal thermal_zone2: failed to read out thermal zone 2
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:01.0: SDHCI controller found [8086:1190] (rev 1)
flis_addr mapped addr: f8496900
sdhci-pci 0000:00:01.0: rte_addr mapped addr: f849a000
sdhci-pci 0000:00:01.0: setting latency timer to 64
mmc0: no vqmmc regulator found
mmc0: BKOPS_EN bit is not set
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 H4G1d\x04 3.64 GiB
mmcblk0boot0: mmc0:0001 H4G1d\x04 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 H4G1d\x04 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 H4G1d\x04 partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
mmcblk0boot1: unknown partition table
mmcblk0boot0: unknown partition table
mmc0: SDHCI controller on PCI [0000:00:01.0] using ADMA
emmc_ipanic: panic partition found, label:panic, device:mmcblk0p6
emmc_ipanic: emmc_panic_notify_add: Data available in panic partition
emmc_ipanic: emmc_panic_notify_add: proc entry created: emmc_ipanic_header
emmc_ipanic: emmc_panic_notify_add: log file 0(1024, 41131)
emmc_ipanic: emmc_panic_notify_add: proc entry created: emmc_ipanic_console
emmc_ipanic: emmc_panic_notify_add: log file 1(4286578688, 0)
emmc_ipanic: emmc_panic_notify_add: empty log file 1
emmc_ipanic: emmc_panic_notify_add: log file 2(4286578688, 0)
emmc_ipanic: emmc_panic_notify_add: empty log file 2
sdhci-pci 0000:00:01.2: SDHCI controller found [8086:1190] (rev 1)
sdhci-pci 0000:00:01.2: setting latency timer to 64
mmc1: no vqmmc regulator found
mmc1: SDHCI controller on PCI [0000:00:01.2] using ADMA
sdhci-pci 0000:00:01.3: SDHCI controller found [8086:1190] (rev 1)
vwlan gpio 96
vwlan: 1800 mV
sdhci-pci 0000:00:01.3: setting latency timer to 64
mmc2: no vqmmc regulator found
mmc2: SDHCI controller on PCI [0000:00:01.3] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel_scu_fw_update rpmsg11: Probed fw_update rpmsg device
intel_scu_fw_update rpmsg11: Allocating rpmsg_instance
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (15366 buckets, 61464 max)
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
l2tp_core: L2TP core driver, V2.0
Key type dns_resolver registered
Using IPI No-Shortcut mode
info[ 0]: name = power_btn, gpio = -1
info[ 1]: name = SW1UI4, gpio = 61
registered taskstats version 1
intel_mid_ssp_spi_unified 0000:00:07.0: found PCI SSP controller (ID: 8086h:1194h cfg: 0dh)
intel_mid_ssp_spi_unified 0000:00:07.0: register with SPI framework (bus spi3)
intel_mid_ssp_spi_unified 0000:00:07.0: master is unqueued, this is deprecated
intel_mid_ssp_spi_unified 0000:00:07.1: found PCI SSP controller (ID: 8086h:1194h cfg: 15h)
intel_mid_ssp_spi_unified 0000:00:07.1: register with SPI framework (bus spi5)
intel_mid_ssp_spi_unified 0000:00:07.1: master is unqueued, this is deprecated
mmc1: new high speed SDHC card at address 1234
intel_mid_ssp_spi_unified 0000:00:07.2: found PCI SSP controller (ID: 8086h:1194h cfg: 19h)
mmcblk1: mmc1:1234 SA04G 3.63 GiB
intel_mid_ssp_spi_unified 0000:00:07.2: register with SPI framework (bus spi6)
intel_mid_ssp_spi_unified 0000:00:07.2: master is unqueued, this is deprecated
mmcblk1: p1
console [netcon0] enabled
netconsole: network logging started
input: gpio-keys as /devices/platform/gpio-keys/input/input0
rtc_cmos rtc_cmos: setting system clock to 2000-01-01 00:00:08 UTC (946684808)
pmic_ccsm rpmsg3: Probed pmic_ccsm rpmsg device
pmic_ccsm pmic_ccsm: PMIC-ID: c9
pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
pmic_ccsm pmic_ccsm: Battery Over heat exception
pmic_ccsm pmic_ccsm: Battery Zone changed. Current zone is 5
APIC ID: 0
APIC ID: 2
Num p-states 2
State [0]: core_frequency[500] transition_latency[100] control[0x528]
State [1]: core_frequency[500] transition_latency[100] control[0x528]
Num p-states 2
State [0]: core_frequency[500] transition_latency[100] control[0x528]
State [1]: core_frequency[500] transition_latency[100] control[0x528]
msic_power_btn rpmsg2: Probed mid_pb rpmsg device
msic_power_btn mid_powerbtn: Probed mid powerbutton devivce
input: mid_powerbtn as /devices/platform/mid_powerbtn/input/input1
pmic_ccsm pmic_ccsm: USB ID Detected. Notifying OTG driver
ALSA device list:
#0: Loopback 1
EXT4-fs (mmcblk1p1): INFO: recovery required on readonly filesystem
EXT4-fs (mmcblk1p1): write access will be enabled during recovery
EXT4-fs (mmcblk1p1): recovery complete
EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 179:129.
devtmpfs: mounted
Freeing unused kernel memory: 624k freed
Write protecting the kernel text: 6584k
Write protecting the kernel read-only data: 2608k
NX-protecting the kernel data: 5704k
mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
mmc2: new ultra high speed DDR50 SDIO card at address 0001
stty (91) used greatest stack depth: 6364 bytes left
udevd[199]: starting version 175
dhd_module_init in
found wifi platform device wlan
Power-up adapter 'DHD generic adapter'
wifi_platform_set_power = 1
wifi_platform_bus_enumerate device present 1
bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
bus num (host idx)=2, slot num (rca)=1
found adapter info 'DHD generic adapter'
F1 signature OK, socitype:0x1 chip:0xa94c rev:0x2 pkg:0x0
DHD: dongle ram size is set to 524288(orig 524288) at 0x0
wifi_platform_get_mac_addr
wifi_get_mac_addr_intel: unable to open /config/wifi/mac.txt
wl_create_event_handler(): thread:wl_event_handler:16d started
CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xf56a1520
dhd_attach(): thread:dhd_watchdog_thread:16e started
dhd_attach(): thread:dhd_dpc:16f started
dhd_deferred_work_init: work queue initialized
Dongle Host Driver, version 1.141.59 (r)
Compiled in /data/jenkins_worker/workspace/edison-weekly/broadcom_cws/wlan/driver_bcm43x on Aug 20 2014 at 16:10:17
Register interface [wlan0] MAC: 00:90:4c:11:22:33
dhd_prot_ioctl : bus is down. we have nothing to do
bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
wifi_platform_set_power = 0
wifi_platform_bus_enumerate device present 0
modprobe (267) used greatest stack depth: 5504 bytes left
EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
Dongle Host Driver, version 1.141.59 (r)
Compiled in /data/jenkins_worker/workspace/edison-weekly/broadcom_cws/wlan/driver_bcm43x on Aug 20 2014 at 16:10:17
wl_android_wifi_on in
wifi_platform_set_power = 1
F1 signature OK, socitype:0x1 chip:0xa94c rev:0x2 pkg:0x0
DHD: dongle ram size is set to 524288(orig 524288) at 0x0
dhdsdio_download_firmware: firmware path=/lib/firmware/fw_bcmdhd.bin, nvram path=/lib/firmware/bcmdhd.cal
sdioh_request_buffer: [1] doing memory copy buf=f568b000, len=2037
dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
wifi_platform_get_mac_addr
wifi_get_mac_addr_intel: unable to open /config/wifi/mac.txt
Firmware up: op_mode=0x0015, MAC=78:4b:87:a4:08:d0
Firmware version = wl0: Aug 15 2014 15:09:17 version 6.20.190.2 (r497061) FWID 01-bb9bbd07
dhd_preinit_ioctls wl ampdu_hostreorder failed -23
CFG80211-ERROR) wl_update_wiphybands : bw_cap failed, -23
wpa_supplicant (1435) used greatest stack depth: 5092 bytes left
CFG80211-ERROR) wl_cfg80211_connect : Connectting with06:27:22:f3:45:a3 channel (11) ssid "Khomp Interno", len (13)
wl_bss_connect_done succeeded with 06:27:22:f3:45:a3
wl_bss_connect_done succeeded with 06:27:22:f3:45:a3
ip (30833) used greatest stack depth: 5060 bytes left
ip (30841) used greatest stack depth: 4932 bytes left
EXT4-fs (mmcblk0p8): recovery complete
EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)